Micro Mini2go Deluxe, User Manual

Page: 27 / 80

wear and tear
27
EN
On the handlebar
1. Attach the silicone band
17
to the bulb
16
(see Fig. V ).
2. Make sure that the rubber protection is securely attached to the holders (see Fig. W and X ).
3. Wrap the rubber ring diagonally around the rod and attach it to the holder on the bulb (see Fig. Y ).
Wear and tear
Changing the brakes
1. Unscrew the eight screws
5
(see Fig. E ).
2. Remove the deck
6
(see Fig. F ) and unscrew the brake screws with a screwdriver.
3. Replace the brake and screw the deck on again.
Changing the wheel spring
1. Loosen the screw
7
with a screwdriver (see Fig. G ).
2. Push the wheel spring
8
upwards and replace it with a new wheel spring (see
Fig. H
).
3. Put the screw back and tighten it.
Maintenance
Regularly check that all screws are tight, check the condition of the wheels, and replace if necessary. Clean the
Mini2go Deluxe with a soft, moist cloth after each use, and regularly check for visible damage or changes.