Micro Mini2go Deluxe, User Manual

Page: 26 / 80

aSSembling the SliDe roD (only mini2go Deluxe PluS)
26
When removing, loosen the seat housing hooks on the underside of the deck carefully; otherwise,
they may break.
Assembling the slide rod (only Mini2go Deluxe Plus)
1. Lay out all the parts of the Mini2go Deluxe Plus in front of you (see Fig. M ).
2. Insert the base slide rod
15
into the hole on the back side of the seat (see Fig. N ).
3. Remove the bulb socket pin
18
(see Fig. O ).
4. Attach the slide rod
14
to the base slide rod (see Fig. P ).
5. Adjust the length of the slide rod so that the holes are exposed and attach the bulb socket pin (see Fig. Q ).
6. Push the base locking mechanism
19
through the end of the slide rod on the underside of the
seat (see Fig. R ).
Installing the light (only Mini2go Deluxe Plus)
Inside the housing
1. Hold the bulb in your hand and make sure that the arrow is pointing forwards before assem-
bling (see Fig. S ).
2. Push the bulb into the opening (see Fig. T ).
3. Twist the bulb in the opening until it locks into place (see Fig. U ).