background image

P.O. Box 99

111 East LeRay Avenue

Eagle Lake, MN 56024-0099

© Copyright 2019

Micro-Trak Systems, Inc.

Printed in the U.S.A. 

The ProPlant is an electronic monitoring and control system that can help you achieve maximum yields and operate more 

cost-effectively by providing accurate control of seed rates plus the ability to vary seed rates on-the-go, via either VRA or the 

console keys - to match field conditions. The ProPlant has been designed for easy installation and op er a tion. How ev er, since 

each in stal la tion will vary depending on your equipment, please take time to fa mil iar ize yourself with this manual and the 

actual components before beginning. Following the procedures described in this manual will ensure proper per for mance and 

help avoid problems or questions once you are in the field.
This manual may be used for either English or Metric mea sure ment. Please read the manual carefully and follow the instructions 

as they apply to your usage.
If you do encounter a problem that cannot be corrected by reviewing this manual, consult your dealer or distributor, or contact 
a Micro-Trak technician for assistance.

Toll Free in U.S. or Canada: (800) 328-9613 or (507) 257-3600

Fax: 507-257-3001

E-mail: [email protected]

Web: www.micro-trak.com

2

R

e f e R e n c e

 M

a n u a l

P

ro

P

lant

TM

A

utomatic

 S

eed

 

R

ate

 

C

ontroller

Summary of Contents for ProPlant

















































Reviews: