Flashing RED LED:
The Red LED will flash if you are doing something wrong.
This is the C5 (or B5) preventing you from overheating the device.
To prevent damage and to get the most out of your C5:
•
Always keep all coils firmly and fully plugged in
(you can use fewer than 4 coils)
•
Check coils often, listen for clicks, and use the hexagonal coil tester
•
Don’t
run on full power and maximum frequency for long periods
•
Do not cover the C5 with blankets or pillows
(you can cover the coils, but not the device itself)
COPYRIGHT © 2018 Micro-Pulse LLC
