Micro Matic Wine Saver HOME, Operation Manual

Page: 4 / 12

3
1. Rinse Tap Head and Draw Stem in hot water.
Allow all pieces to dry prior to using.
2. Slide the Draw Stem into
the hole in the bottom of the
Tap Head.
3. Adjust the Draw Stem to
fit your specific bottle by
visually aligning the top of
the rubber section of the Tap
Head with the top edge of the
bottle. Adjust the Draw Stem
so it will reach the bottom of
the bottle.
4. Insert Tap Head/Draw
Stem assembly into
bottleneck. Firmly press
down into bottleneck
until tightly seated.
5. Connect Quick Connect coupler
to WSH Tap Head assembly:
A. Grasp Quick Connect coupler from
WSH Rack.
B. Rotate Quick Connect coupler so that
the metal push button is facing up.
C. Depress button while pushing Quick
Connect onto end of Tap Head. Press firmly
until metal push button snaps into place with
a "click". After hearing the "click", releasing the
button will lock the Quick Connect into place.
Repeat these steps for all three bottles.
Note:
Draw Stems are
adjustable to reach the
bottom of most 750 ML
bottles.
ASSEMBLING YOUR WINE SAVER HOME
Depress metal
push button
Align
Adjust
metal button
facing up