Micro Matic PREMIUM PLUS 8011X-PP, Instruction

Page: 2 / 28

ENGLISH
2
drop the regulator. In case you
drop it or it falls down, please
check gas leaking. In case of
damage, stop use and request
for repair and check up.
• Prevent foreign particles or
dust from getting into the
regulator.
• Be aware of icing (ice
formation and freezing caused
by drop in temperature of the
carbon dioxide gas) that will
cause damage of equipment
and frostbite.
• Do not disassemble or
convert.
• Place the equipment in
environments away from
water, salt, acid, etc. in order
to avoid corrosion.
• Do not put anything on the
regulator.
• If safety relief valve operates,
stop use and request for repair
and check up.
• Always deliver the equipment
to your supplier in case of
working faults or damage.
Trained staff, only, must make
repairs or replacements.
• Please note that certain gases
(for instance CO
2
/N
2
) can in
high concentration have a
suffocating effect. If a CO
2
/N
2
leak is found, leave the area
and arrange for immediate
ventilation.
Application:
In order to use the gas from the
gas cylinder you have to reduce
the high pressure in the cylinder
(up to about 230 bar) to the
pressure recommended (working
pressure).
The regulator is available both in
Primary (regulates gas pressure
to secondary regulator panel or
direct to product) and Secondary
(regulates pressure to each
product) reducer.
Safety precautions -
Warning!
Please read the instructions
carefully before you start using
the regulator.
Warning: When working with
pressurised equipment or
equipment used for gases,
please always follow the safety
regulations to avoid damage to
persons or materials.
• Always keep workplace and
equipment clean.
• Only use equipment designed
for the purpose.
• Check equipment regularly
for leaks, and do not use
unauthorized tools or articles
not designed for use with the
regulator.
• Carefully handle and do not