Device description GF0
MICRO PANEL
Communications Cards and COM SLOT
22
Technical subject to change
M000235-01.DOC
© by Micro Innovation
10 C
OMMUNICATIONS
C
ARDS AND
COM SLOT
The Micro Panel GF0 has one slot for a communications card (
→
Section 17). The link to the
automation equipment (e.g. PLC) or the fieldbus system is implemented using one of the several
cards available.
Please contact your local Micro Panel dealer or the Technical Support at Micro Innovation AG for
information concerning currently available communications cards and communication protocols.
Safety precautions concerning electrostatic discharge (ESD) must be observed
when handling cards !
Never plug in the cards with the power supply switched on.
Only operate the communications card once it has been fully screwed into
position.
Do not run any non-Micro Innovation components in the slots. Only original
hardware from Micro Innovation AG may be used.
Refer to the relevant communication card descriptions for information on
protocols, configuration, cable lengths etc.
Communications card in COM SLOT of the Micro Panel GF0
efesotomasyon.com - Klockner Moeller - inverter
