Page 47
Installation and Commissioning
thermoIMAGER TIM
7.
Installation and Commissioning
i
All drivers are booted via Windows OS automatically. A driver installation is not necessary.
By default the program starts automatically in the installed language.
1. Insert the included USB stick into the according port on your computer.
2. Please start
Setup.exe
. Follow the instructions of the wizard until the installation is finished.
The installation wizard places a launch icon on the desktop and in the start menu:
Start\Programs\TIM
Connect
.
3. To connect the camera to the PC, plug the USB cable to the camera first. Afterwards connect it with
the PC. To disconnect the camera and the computer remove the USB cable from the computer first and
then disconnect it from the camera.
4. Start the software.
At the initial start the software asks for the calibrations files which are available via internet or on the USB
stick.
5.Install the calibration files at first start of the software.
Fig. 21 Calibration data transfer
