![background image](http://html1.mh-extra.com/html/micro-epsilon/if2030-pnet/if2030-pnet_operating-instructions-manual_1785372036.webp)
Page 36
Commissioning
IF2030/PNET
5.7.4
Basic Settings Module
You can specify basic settings using the TIA portal inter-
face. Proceed as follows to configure the IF2030/PNET
based on a few basic parameters.
In the
Hardware catalog
, select the
Basic
settings
output module and place it in the next
free slot in the
Device overview
.
The input module must be located before the basic
settings module.
Double-click the module in the
Device over-
view.
In the
Inspection window
, navigate to
the
Properties
> General > Component param-
eters tab.
Fig. 17 Basic settings module in the hardware catalog
Summary of Contents for IF2030/PNET
Page 1: ...Operating Instructions IF2030 PNET...
Page 57: ......