![background image](http://html1.mh-extra.com/html/micro-epsilon/if2030-pnet/if2030-pnet_operating-instructions-manual_1785372037.webp)
Page 37
Commissioning
IF2030/PNET
Specify the required settings, e.g., baud rate, sensor
interface. Enable the settings by using the parameter
Init-Config
.
Detailed information about this process is available in the
Baud rate and Interface section, see Chap.
.
Save your changes by clicking the
Save project
button (at top left on the function bar).
Now you can load the settings into the CPU.
Select your S7 device in the
Working window
if this
has not been done already, and click the
Load to
device
symbol button on the
Function bar
.
Reboot the IF2030/PNET to have the changes take
effect!
i
This step is necessary because of the selected/used mechanism for establishing a GUI to parameterize the IF2030/PNET; it pre-
vents the configuration from being sent repeatedly to the CPU as programs are run.
Please refer to the instructions for commissioning for more information. The current version is available at https://www.micro-epsilon.
de/download/manuals/mav--IF2030-PNET--en.pdf.
Summary of Contents for IF2030/PNET
Page 1: ...Operating Instructions IF2030 PNET...
Page 57: ......