Page 5
Safety
IF2004/USB
1.
Safety
System operation assumes knowledge of the operating instructions.
1.1
Symbols Used
The following symbols are used in these operating instructions:
Indicates a hazardous situation which, if not avoided, may result in
minor or moderate injury.
Indicates a situation that may result in property damage if not
avoided.
Indicates a user action.
i
Indicates a tip for users.
Measure
Indicates hardware or a software button/menu.
1.2
Warnings
Connect the power supply according to the safety regulations for electrical equipment.
> Risk of injury
> Damage to or destruction of the converter
Avoid shocks and impacts to the converter.
> Damage to or destruction of the converter
The supply voltage must not exceed the specified limits.
> Damage to or destruction of the converter
Protect the cable against damage.
> Destruction of the converter
> Failure of the converter
1.3
Notes on CE Marking
The following apply to the IF2004/USB converter:
-
EU Directive 2014/30/EU
-
EU Directive 2011/65/EU, “RoHS“
Products which carry the CE mark satisfy the requirements of the EU directives cited and
the European harmonized standards (EN) listed therein. The EU Declaration of Conformi-
ty is available to the responsible authorities according to EU Directive, article 10, at:
MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Straße 15
94496 Ortenburg / Germany
The converter is designed for use in industrial environments and meets the require-
ments.
