MICRO-EPSILON IF1032/ETH, Instruction Manual

Page: 58 / 80

Page 58
EtherCAT Interface
IF1032/ETH
7.2 Change Interface
You cannot change directly to the EtherCAT interface through the web interface or command.
Restart your interface module to do this.
i
Also keep in mind that the setting of the EtherCAT switch is in the correct position, see Fig. 16 .
Switch position Declaration
Ethernet Independent of software adjust-
ment, the Ethernet interface is
always active.
ECAT/Auto Interface is active which is
adjusted via web interface or
command.
Fig. 16 Switch to change the interface
A change back from the EtherCAT interface to Ethernet is possible using the hardware switch on the interface
module or via the appropriate CoE object. In both cases, a restart of the interface module is required after-
wards.
An ESI file is included for the integration of the EtherCAT interface, e.g. in TwinCAT.
Further details can be found in the Appendix, see Chap.
A 1.