Page 17
Installation and Assembly
eddyNCDT SGS 4701
Run the sensor cable through the sensor
cap and the cable gland.
i
Avoid a strong cable bending.
Sensor
Sensor cable
Sensor cap
Cable gland
Controller
Bend up the green cable seal easily and insert the sensor cable.
Connect the sensor cable to the controller
Solder connection
Plug connection
Shield
Signal
Solder the sensor cable to the connection
board.
Connect the sensor cable to the female
connector.
i
Connector mating life is 20 cycles.
Close the cable gland.
Push the sensor cap onto the controller housing until it snaps in place.
Fig. 9 Connection sensor cable
