Page 50
Commands
colorCONTROL MFA-5
6.2.2.4 Manual Check of Pulsed LEDs
capturepwm## zb
Measures and saves the color and intensity of pulsed (PWM) LEDs with the specified test time.
Command
Description
Received
Example
Note
capturepwm ## zb ## Average factor
0 = 5 test processes
1 = 10 test processes
2 = 15 test processes
3 = 20 test processes
-----
15 = 80 test processes
z = channel
b = board
OK
capturepwm 1032
OK
10 = 55 test processes
z = channel 3
b = board 2
PWM LED = Pulse Width Modulated LED
This command enables optimum setting for every pulsed (PWM) LED.
The first two factors refer to the average factor of minimum 5 and maximum 80 test processes.
z refers to the channel and b identifies the colorCONTROL MFA-5 used.
The Average Factor is divided in 15 ranges, factor 2 relates to 15 test processes.
The settings of the test time and the color chip range are based on the previous settings for this checkpoint,
e.g. using the command
Board = colorCONTROL MFA-5
Channel = checkpoint
