MCS-Bacnet-Router2
REVISION 2
12
4.2.
Login and Passwords
Click through the menus on the left hand side to become familiar with the different screens. If you click on
Config
in the left menu, you will be asked to enter the administrator password in order to make changes to
the settings as shown in Figure 4. Enter the default administrator password ‘loytec4u’ and select
Login
. Note,
that previous firmware versions used ‘admin’ as the default password.
The Config menu opens. Click on
Passwords
in the Config menu, which opens the password configuration
page as shown in Figure 5. The device has three user accounts: (1)
guest
allows the user to view certain
information only, e.g., the device info page. By default the guest user has no password. (2)
operator
is able
to read more sensible information such as calendar data. (3)
admin
has full access to the device and can
make changes to its configuration. Note that the user accounts are also used to log on to the FTP and Telnet
server.
Please change the administrator password in order to protect yourself from unwanted configuration changes
by anyone else. To do so, select the
admin
account in the drop- down box and enter the new password.
If the administrator password is left empty, password protection is turned off and everyone can access the
MCS-BACNET-ROUTER2 without entering a password. Click on
Change password
to activate the change.
LIP-ME201 User Manual
15
LOYTEC
Version 4.8
LOYTEC electronics GmbH
Figure 3: Device Information Page.
The device information page shows information about the LIP-ME201 and the current
firmware version. It also contains operational parameters, such as free memory, system
temperature and supply voltage.
Click through the menus on the left hand side to become familiar with the different screens.
If you click on
Config
in the left menu, you will be asked to enter the administrator
password in order to make changes to the settings as shown in Figure 4. Enter the default
administrator password ‘loytec4u’ and select
Login
. Note, that previous firmware versions
used ‘admin’ as the default password.
Figure 4: Enter ‘loytec4u’ as the default administrator password.
The Config menu opens. Click on
Passwords
in the Config menu, which opens the
password configuration page as shown in Figure 5. The device has three user accounts: (1)
guest
allows the user to view certain information only, e.g., the device info page. By
default the guest user has no password. (2)
operator
is able to read more sensible
information such as calendar data. (3)
admin
has full access to the device and can make
changes to its configuration. Note that the user accounts are also used to log on to the FTP
and Telnet server.
LIP-ME201 User Manual
16
LOYTEC
Version 4.8
LOYTEC electronics GmbH
Figure 5: Password Configuration Screen.
Please change the administrator password in order to protect yourself from unwanted
configuration changes by anyone else. To do so, select the
admin
account in the drop-
down box and enter the new password. If the administrator password is left empty,
password protection is turned off and everyone can access the LIP-ME201 without entering
a password. Click on
Change password
to activate the change.
4.2 Device Configuration
The device configuration pages allow viewing and changing the device settings of the LIP-
ME201. Here are some general rules for setting IP addresses, port numbers, and time
values:
•
An empty IP address field disables the entry.
•
An empty port number field sets the default port number.
•
An empty time value field disables the time setting.
4.2.1 System Configuration
The system configuration page is shown in Figure 6. This page allows configuring the
device’s system time and other system settings. The
TCP/IP Configuration
link is a
shortcut to the Ethernet port configuration. Follow that link to change the IP settings of the
device.
The time sync source can be set to
auto
,
manual
,
NTP
,
BACnet
. In the
auto
mode, the
device switches to the first external time source that is discovered. Possible external time
sources are NTP, BACnet. The option
manual
allows setting the time manually in the
fields
Local Time
and
Local Date
. In
manual
mode, the device does not switch to an
external time source. Note, that if
NTP
is selected, the NTP servers have to be configured
on the IP Configuration page (see Section 4.2.4).
The time zone offset must be defined independently of the time source. It is specified as the
offset to GMT in hours and minutes (e.g., Vienna/Austria is +01:00, New York/USA is
-06:00). For setting the daylight saving time (DST) predefined choices are offered for
Europe and USA/Canada. DST can be switched off completely by choosing
none
or set
manually for other regions. In that case, start and end date of DST must be entered in the
fields below.
