MICRO-AIR SC 150, Owner'S Manual

Page: 3 / 8

NOTE: After some time,the flexible hose may not hold in a horizontal
position. This can be fixed by simply twisting the hose
counterclockwise thereby slightly reducing the hose diameter and
tightening the segmented joints.
OPTIONAL INSTALLATION APPLICATIONS
This section displays options available to the SC150 for specific
applications:
A. Table Bracket Mounting (See FIG. 3.)
1. This option is designed when the customer wishes to place
the unit on the floor and clamp the hose to a bracket on the
table. This clears space for the worker.
FIG. 3
B. Optional Wall Mount Assembly for Vertical
Installation.
(See Fig. 4)
1. This installation allows the SC150 to be mounted on a
wall in a vertical position. The exhaust is then pointed
upward, and the arm (or arms) is at the bottom end,
close to the work area.
3
SC150 INSTALLATION INSTRUCTIONS FOR VERTICAL
WALL MOUNT APPLICATIONS
This kit (Part No. 33076-01) contains:
1 33078-01 Wall Bracket
1 33080-01 Unit Bracket
3 P103 #10 x 1 1/4” Long Hex Screw
1. Remove the two plastic feet near the air exhaust end of
the SC150 using a phillips head screw driver. Retain the
screws.
2. Attach the unit bracket to the bottom of the SC150 using
screws that originally secured plastic feet. (See FIG 5.)
FIG. 4
FIG. 5
OPTIONAL WALL
BRACKET NOT
FOR VERTICAL
INSTALLATION
PART NO. 33076-01
EXTENSION HOSE OR PVC
SUPPLIED BY OTHERS. 3"
INSIDE DIAMETER REQUIRED.
TABLE CLAMP
BRACKET
PART NO. 33085-01