MICOM SWING SW & SWSP
Installation Manual
Page
38
Operating Modes
The Selector B (Digital) has 6 buttons, giving various working modes. It also has 6 LED indicators that
show the current working mode. All of the working modes available are as follows:
“Close” mode. This mode allows us to close the door (locked if it has an electro-
magnetic lock). In this mode the emergency opening system (battery) will remain
disconnected.
“Exit only” mode. This mode only allows to exit.
“Entre only” mode. This mode only allows Entry only.
“Automatic” mode. This mode allows to enter and exit.
“Permanently open” mode.
“Manual” mode. In this mode, the operator does not act on the door and allows it to
open or close manually.
Memory Retension
Another function that Selector B (Digital) offers is to save the setting in the memory even after a
power cut. There are 2 possible working modes.
“NO MEMORY” mode. In this programming mode the state of the selector is NOT saved in the
memory in the event of a power cut. When the power resumes the automatic door will always be re-
established in the
“close” working mode.
In order to activate the NO MEMORY mode,
keep the ‘close’ button pressed down for 5 seconds.
“WITH MEMORY” mode. In this programming mode, the state of the selector is saved in the
memory when there is a power cut and therefore when the electric supply returns, the operator will
