2
Table of Contents
Features
Table of Contents � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
Safety � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
750SS Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11
751SS Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12
754SS Specifications � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13
750SS, 751SS, 754SS Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � 14
Disassembly � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16
Assembly� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
Troubleshooting � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25
Limited Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 26
Notes � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 27
All the Power of a 1" Impact in the Compact Size of a Traditional
3/4" Class Pistol Grip Tool.
2000 ft-lbs Reverse Torque.
1800 ft-lbs Forward Torque.
Low Air Consumption at 58 cfm.
Weighs Only 13.5 lbs.
300 Series Stainless Steel Hammer Case Housing and Throttle
Components.
3 Options for Anvil: 3/4" Dual Retainer Anvil, 1" Dual Retainer Anvil,
#4 Spline Anvil.
The 750SS Series Impact offers the highest power to weight ratio in a 3/4"
impact. Featuring Stainless Steel Hammer Case and Throttle Components for
use in corrosive environments. The inevitable water and debris that is found in
compressed air systems is no match for the stainless steel throttle parts and
motor design. The combination of the bronze end plates and stainless steel
cylinder prevent the 750SS series tools from becoming seized after sitting for
a nominal period of time with condensation in the motor chamber. The Dual
Retainer design on the 3/4" Sq. and 1" Sq. Drive anvils provide the operator with
socket retainer options. The Twin Hammer design in conjunction with tight motor
tolerances delivers extreme torque. Made in the USA.
1
2
3
4
5
6
7
Summary of Contents for 750SS Series
Page 27: ...27 Notes...
