XTC601 User’s Manual
Michell Instruments
13
OPERATION
•
Chart data is not available via serial comms or in the blind unit as the
Application Software is able to perform more sophisticated charting functions.
NOTE: This data is not available via the Modbus
2.5.3 Secondary Parameters Page
PCB TEMP, °C 28
CELL T, °C 50.0
COMP I/P
OFF
EXT I/P
OFF
Figure 13
Secondary parameters page
Parameter Description
CELL T
CELL T
Sensor cell temperature display in set unit (°C, °F or Kelvin)
PCB TEMP
PCB TEMP
Temperature display of Microcontroller in selected temperature unit
This gives an indication of the internal GUB temperature
COMP I/P
COMP I/P
(standard version
(standard version
only)
only)
The value of compensation input (mA i/p channel 1) as a %
(4mA=0% and 20mA=100%)
OFF
OFF
displayed instead of value if external compensation is turned off
PHASE I/P
PHASE I/P
(HCG version
(HCG version
only)
only)
Displays the value of the Phase Selection Input in mA (mA i/p channel 1)
OFF
OFF
displayed instead of value if phase selection set to 'Internal'
EXT I/P
EXT I/P
Value of the external input in the selected parameter and unit
(DEWP, TEMPR, PRESS, OTHER or NONE)
OFF
OFF
displayed instead of value if external compensation parameter is set
to
NONE
NONE
Table 3
Secondary parameters