Michell Instruments Promet I.S., User Manual

Page: 46 / 78

Promet I.S. User’s Manual
38 97221 Issue 5, March 2017
OPERATION
3.6.2 Maximum Dew-point Value for the Fault Alarm
2 0. 0 C
M A X _ D P
This is the maximum dew-point above which the fault alarm will be activated.
a. Increase or decrease the value by pressing the

and

keys.
b. When the desired set-point is on the display press the
Select
key to
con fi rm. The display will then change to the next setting parameter - the
minimum pressure fault alarm set-point.
NOTE: This fault alarm set-point can only be set in °Cdp, no matter what unit
has been selected for the Main Reading Page.
3.6.3 Minimum Pressure Value for the Fault Alarm
0. 0 8
M I N _ B
This is the minimum pressure below which the fault alarm will be activated.
a. Increase or decrease the value by pressing the

and

keys.
b. When the desired set-point is on the display press the
Select
key to
con fi rm the choice. The display will then change to the next setting
parameter - the maximum pressure fault alarm set-point.
NOTE: The unit could be either barg (B) or psig (P), depending on the choice
of pressure unit in
DISP
– display settings sub-menu (refer to Section 3.5.1).
The value will be automatically converted if a new unit is selected.