Michell Instruments MDM300 I.S, User Manual

Page: 38 / 72

MDM300 I.S. User’s Manual
30 97213 Issue 5, October 2017
OPERATION
3.4.9 LOG FILES Page
If the instrument is not logging, pressing the

key, while the chart is displayed, will
show the FILES Page. This page provides a list of all the previously saved log files,
together with an indication of the available memory capacity (see
Figure 24). To scroll
through the list, use the

and

keys as required.
11 fi l es
1 69K used
8397K Free
1 .txt 1 K 0 1 30 1 3 1 8
2.txt 1 K 0 1 30 1 3 1 9
3.txt 1 5K 0305 1 352
4.txt 4K 03 1 5 1 738


Not logging, press ENTER to setup logging
Figure 24
LOG FILES Page
The content of the datalog files cannot be examined but, by enabling the instrument’s
Bluetooth mode, (see Section 3.4.3), the MDM300 I.S. application software may be
used to upload the datalog files to a PC.
In the FILES Page a shortcut to the LOGGING Set-Up Menu is provided by pressing the
Enter
key. Refer to Section 3.4.2 for logging set-up details.
3.4.10 LOGS Page
If the instrument is logging, pressing the

key, while the chart is displayed, will show
the LOGS Page. The page shows the current log file.
In the LOGS Page a shortcut to the LOGGING Set-Up Menu is provided by pressing the
Enter
key. Refer to Section 3.4.2 for logging set-up details.
The

and

keys are both active while the log file is being displayed. To view log
points taken earlier in the logging cycle, press the

key. To continuously scroll back,
keep the

key pressed down.
Similarly, to move forward in the list press the

key, once for a single step, or press
and hold to continuously scroll forward.
File CR030911
INT RH
EXT. EXT_DP
INTVAL 05 Sec
D# 110903
T# 123606
#
106
107
108
109
110
INT
- 100.0
26.8
26.2
25.9
25.8
25.5
-90.0
-80.0
-70.0
-60.0
EXT
ST
0028
0028
0028
0028
0028
Figure 25
LOGS Page