MAINTENANCE
Good maintenance procedures assure better operation, fewer repairs and longer life for
your machine.
WARNING! - DISCONNECT THE ELECTRICAL PLUG OF THE
MACHINE FROM THE ELECTRICAL OUTLET BEFORE DOING ANY
CLEANUP, REPAIRS OR MAINTENANCE OF THE MACHINE AND WHEN
LEAVING THE MACHINE UNATTENDED.
CLEAN THE MACHINE AFTER EACH USE:
1) Each week, rinse, dry and return the foam (Item # 22) at the bottom of the vacuum tank
below the vacuum motor.
2) Clean the vacuum tank: Release the clamps on each side of the top of the vacuum tank.
Lift the filter assembly out of the vacuum tank and set aside. Wipe the inside and outside of
the vacuum tank with a clean dry cloth.
3) Empty and check the filter assembly: Empty the recovered soilage into a suitable container
and remove and shake the cloth filter bag to remove clinging dirt. Lightly brush the inside of
the cloth filter bag to remove embedded dirt. Check the cloth filter bag for tears or holes;
repair or replace if necessary. Install a clean paper dust bag into assembly into the cloth
filter bag and place them back into the vacuum tank.
ELECTRICAL CABLE:
Check the cord for any nicks, cuts or damage. Report these to your supervisor for correction.
VACUUM TANK ASSEMBLY:
1) Gaskets: Clean the Cover Seal Ring gasket.
2) Vacuum Motor Guards: Inspect for dirt or damage and replace if damaged or filled with dirt.
Page 6 of 10