READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS
BEFORE USING THIS MACHINE!
WARNING!
To reduce the risk of fire, electric shock, or injury:
1) You must be trained to operate this machine. This machine is to be operated for its
intended use only.
2) Do not use outdoors or on wet surfaces.
3) Do not operate this machine unless it is completely assembled.
4) Always use a three-wire electrical system connected to the electrical ground. For maximum
protection against electrical shock, use a circuit that is protected by a ground fault circuit
interrupter. Consult your electrical contractor.
5) To prevent electrical shock: Always remove the electrical plug from the electrical outlet
before performing any repairs, maintenance or cleanup and when leaving the machine
unattended.
6) To prevent electrical shock: Keep the machine surface dry; Do not subject to rain; Store the
machine in a dry building area; Clean the machine with a dry cloth only.
7) Machines can cause an explosion when near flammable materials and vapors. Do not use
or store this machine with or near fuels, grain dust, solvents, thinners, or other flammable
materials. Do not use flammables to clean this machine.
8) Maintenance and repairs must be done by a qualified or authorized person.
9) If the machine is not working as it should, has been dropped, damaged, left outdoors, or
dropped into water, return it to a service center.
10) Do not use with damaged cord or plug.
11) Turn off all controls before unplugging.
12) Do not use without a dust bag and/or filters in place.
13) Make sure all labels, decals, warnings, cautions and instructions are fastened to the
machine.
Page 2 of 10