Factory Reset
To
reset
pairing memory, With the Home TX Pro powered
o
ī
, press and hold the mul
Ɵ
-func
Ɵ
on/power bu
Ʃ
on for 18 seconds,
then release the mul
Ɵ
-func
Ɵ
on/power bu
Ʃ
on and power o
ī
the
Miccus® Home TX Pro. The Device has been reset.
Note:
A
Ō
er a factory reset, the internal Bluetooth® pairing memory
will be deleted. You may need to re-pair any previously paired devices in
order for the Home TX Pro to remember them again
FAQ and Troubleshoo
Ɵ
ng
Problem
Solu
Ɵ
on
Miccus® Home TX Pro
does not turn on.
1. Check the USB power connec
Ɵ
on.
2. Make sure you press and hold the
power bu
Ʃ
on for at least 3.5seconds.
Audio breaks up or
wireless range is too low.
1. Make sure the antenna is a
Ʃ
ached
securely and posi
Ɵ
oned correctly.
2. Move the Home TX Pro
away from other 2.4Ghz equipment
such as Wi-Fi routers and micro-
waves.
No sound/audio output
1. Check the cables to make sure they
are connected to the correct jacks.
2. Press play on your music source.
3. Check to make sure your volume is
set to a listenable level.
Can’t control volume
1. By design the Home TX Pro
is a passive transmi
Ʃ
er and has no
volume control. User volume level
must be adjusted via the input and/or
output sources connected to the
Miccus® Home TX Pro.
7
System Requirements
The Home TX Pro transmits high quality stereo audio to any
compa
Ɵ
ble A2DP Bluetooth® pro
fi
le wireless
Receiving
device.
Compa
Ɵ
ble devices include Bluetooth® enabled headphones/
speakers or Bluetooth® adapters like the Miccus® Home RTX, Home
RTX Mini, Mini-jack AX4, Mini-jack RTX, or the SR-71 Stealth
Headphones.
Bluetooth Codec Support:
The Home TX Pro provides
support for three common Bluetooth® codecs: SBC, aptX, aptX Low
Latency. In order to pair using a given codec, both the Miccus® Home
TX Pro and the paired receiving device must support the codec. All
Bluetooth® audio devices commonly support the SBC codec. Unless
device speci
fi
c documenta
Ɵ
on indicates otherwise, it is likely the
Miccus® Home TX Pro will pair with your receiving device using the
SBC codec.
Note:
•
The Home TX Pro will use the aptX Low Latency codec
only when paired with a receiving device that also supports
aptX Low Latency.
•
If Television or video audio is your primary use, then it is
recommended to purchase the SR-71 Stealth
Headphones or other A2DP compa
Ɵ
ble Bluetooth®
headphones/speakers that support the aptX Low Latency
codec. The aptX Low Latency codec is only operable when using
one aptX Low Latency compa
Ɵ
ble receiving device at a
Ɵ
me.
With dual-link pairing enabled the aptX Low Latency codec is
non-func
Ɵ
onal.
Other End Bluetooth Device
Supported Codec
The audio lag will be around
aptX low latency
38ms ± 5ms
aptX
70ms ± 10ms
SBC
220ms ± 50ms
4
Home TX Pro User MW.indd Spread 5 of 6 - Pages(8, 5)
Home TX Pro User MW.indd Spread 5 of 6 - Pages(8, 5)
12/21/16 12:02 PM
12/21/16 12:02 PM
Summary of Contents for Home TX Pro
Page 1: ......
