![Miccus Home TX Pro Operation Instructions Manual Download Page 2](http://html1.mh-extra.com/html/miccus/home-tx-pro/home-tx-pro_operation-instructions-manual_1784472002.webp)
Thank you for your purchase of the Home TX Pro (MHTXP-04).
Please read the opera
Ɵ
on instruc
Ɵ
ons carefully before use.
Quick Start Guide:
1. A
Ʃ
ach the antenna:
on the back of the Home TX Pro,
remove the red rubber connector cover and a
Ʃ
ach the supplied
antenna to the antenna terminal (turn clockwise un
Ɵ
l slightly
snug). Op
Ɵ
mize antenna performance by posi
Ɵ
oning the
antenna upright.
2. Connec
Ɵ
ng to the Home TX Pro:
Before powering on
,
set the audio source slider switch on the back right of the
Home TX Pro to either digital (le
Ō
) or analog (right).
Connect the appropriate included cable (Op
Ɵ
cal, or RCA to
3.5mm) to the appropriate audio input (3.5mm, RCA, or
Op
Ɵ
cal) on the back the Home TX Pro.
3. Power on/o
ī
:
The Home TX Pro can be operated using
any USB port or 5v/500mA USB power supply. Connect to USB
power and hold the Mul
Ɵ
-func
Ɵ
on/power bu
Ʃ
on for 3.5
seconds to power on. To power o
ī
, hold the Mul
Ɵ
-func
Ɵ
on/
power bu
Ʃ
on for 3.5 seconds.
4. Paring:
Place your Bluetooth® receiving device into pairing
mode; follow the manufacturer speci
fi
c instruc
Ɵ
ons. Then
Press and hold the Home TX Pro’s mul
Ɵ
-func
Ɵ
on/power bu
Ʃ
on
for 8.5 seconds un
Ɵ
l the indicator light changes from slow
fl
ashing red to fast
fl
ashing red and blue. When pairing is
successful, the far le
Ō
indicator will turn solid blue.
5. Dual-Link Pairing:
Dual-link pairing allows for two Bluetooth®
receiving devices to pair with the Home TX Pro at a
Ɵ
me. Once you’ve paired your
fi
rst set of headphones to the
Home TX Pro (step 4 above), power down both the
Home TX Pro and your headphones. Follow the pairing
instruc
Ɵ
ons in step 4 above to pair the second set of head-
phones. Once the second set of headphones is paired to the
Home TX Pro, the far LEFT blue indicator light will turn
solid blue. Turn on the
fi
rst pair of headphones and they will
automa
Ɵ
cally reconnect to the Home TX Pro, and the
far RIGHT indicator will turn solid blue.
1
FCC Informa
Ɵ
on
This device complies with Part 15 of the FCC rules. Opera
Ɵ
on is
subject to the following two condi
Ɵ
ons: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received; including interference that may cause
undesired opera
Ɵ
on.
Federal Communica
Ɵ
ons Commission (FCC) Statement:
This Equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protec
Ɵ
on against
harmful interference in a residen
Ɵ
al installa
Ɵ
on. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruc
Ɵ
ons, may cause
harmful interference to radio communica
Ɵ
ons. However; there is no
guarantee that interference will not occur in a par
Ɵ
cular installa
Ɵ
on.
If this equipment does cause harmful interference to radio or
television recep
Ɵ
on, which can be determined by turning the
equipment o
ī
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separa
Ɵ
on between the equipment and receiver.
- Connect the equipment into an outlet on a circuit di
ī
erent from
that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Warning:
Changes or modi
fi
ca
Ɵ
ons to this unit not expressly approved by the
party responsible for compliance could void the user authority to
operate the equipment. Tested to comply with FCC standard: FOR
HOME OR OFFICE USE. This equipment complies with FCC RF
radia
Ɵ
on exposure limits set forth for an uncontrolled environment.
This device and its antenna(s) must not be co-located or in conjunc-
Ɵ
on with any other antenna or transmi
Ʃ
er.
© 2017, Inc. All rights reserved. Bluetooth is a trademark of the Bluetooth SIG
and used under license. The aptX® and aptX Low Latency® mark and logo are trademarks
of Qualcomm or one of its group companies and may be registered in one or more
jurisdic
Ɵ
ons. Made in China to Miccus speci
fi
ca
Ɵ
ons.
10
Home TX Pro User MW.indd Spread 2 of 6 - Pages(2, 11)
Home TX Pro User MW.indd Spread 2 of 6 - Pages(2, 11)
12/21/16 12:02 PM
12/21/16 12:02 PM
Summary of Contents for Home TX Pro
Page 1: ......