Miccus Home TX Pro, Operation Instructions Manual

Page: 4 / 6

About the Home TX Pro
The Home TX Pro is a long range wireless stereo transmi Ʃ er
featuring Bluetooth® 4.2 and the aptX Low Latency codec. Use it to
add wireless streaming technology to your exis Ɵ ng television or
stereo equipment, or use it in place of your current transmi ƫ ng
device to extend your wireless range. The Miccus® Home TX Pro
supports Dual-link Pairing which allows two Bluetooth® receiving
devices to be paired with it simultaneously.
What’s in the Box?
•
Home TX Pro
•
RCA to 3.5mm audio cable
•
RCA to RCA audio cable
•
Toslink audio cable
•
Micro USB charging cable
•
USB power supply
•
Antenna
•
User Manual
Ge ƫ ng Aquainted
10 11 12 13 14 15 9
5 6 7
8
4 3 2
༃
Antenna
༄
CH1 Indicator (blue)
༅
Digital mode indicator (white)
༆
Blue Pairing Indicator
༇
Red Pairing Indicator
༈
Analog mode indicator (white)
༉
CH2 indicator (blue)
༊ Mul Ɵ -func Ɵ on/power bu Ʃ on
་
3.5mm audio input
༌
RCA audio input le Ō /right
།
Antenna Connector
༎
SPDIF audio input
༏
Op Ɵ cal audio input (TOSLINK)
༐
Micro-USB power input
༑
Digital/Analog audio
source selector
1
3
Sta Ɵ c or noise
in the audio
1. Make sure to use the supplied USB
adapter as PC USB ports can
introduce noise.
2. Move the Home TX Pro
away from any ampli fi ers or powered
speakers.
3. Make sure the Home TX Pro
is cabled to the correct line level
output on your stereo receiver.
Can’t pair my device
with the Home TX Pro
1. Make sure the Home TX Pro
and the device you’re pairing with
are right next to each other.
2. Make sure all other Bluetooth®
compa Ɵ ble receiving devices you’re
NOT trying to pair with are either
powered o ī or Bluetooth® disabled.
3. Make sure both devices are in pairing
mode. LED equipped devices will
typically fl ash fast when in pairing
mode and fl ash slow when
connected.
4. Make sure your device is compa Ɵ ble
with the wireless A2DP Bluetooth®
stereo audio pro fi le.
Can’t dual link pair my
devices to the Miccus®
Home TX Pro
1. When the standard Dual-Link Pairing
procedure won’t connect more than
one device, follow standard pairing
steps 1-3 to pair both receiving
devices individually then power
down the Home TX Pro and
your second device. Next, power on
both receiving devices then place the
Miccus® Home TX Pro into pairing
mode again. Wait for both devices to
connect. Both the far le Ō and far
right blue indicator lights will turn
solid blue.
8
Home TX Pro User MW.indd Spread 4 of 6 - Pages(4, 9) Home TX Pro User MW.indd Spread 4 of 6 - Pages(4, 9) 12/21/16 12:02 PM 12/21/16 12:02 PM