In the course of charging, once the battery temperature exceeds 50
℃
(122°F), the charger would reduce its charging current to prevent extra high
battery temperature which may damage the battery. When the battery
temperature exceeds 65
℃
(149°F), the charger would stop its charging to
the channel and prompt the feature .
0.1A / 0.2A / 0.3A / 0.5A / 0.8A /
1.0A / 1.5A / 2.0A / 2.5A / 3.0A /
Default current
0.1A / 0.2A / 0.3A / 0.4A / 0.5A /
0.6A / 0.7A / 0.8A / 0.9A / 1.0A /
Default current
Place the battery into any channel and then click the key twice to
flash Battery type. And then press the key for a short time to circularly
display the battery type and select to confirm the battery type wanted. An
automatic exit would be made 5s after the above selection. Alternatively,
press the key for a relatively long time to exit.
Setting of battery type
Function of intelligent temperature control protection
1. Place a battery into any channel.
2. Press the key for relatively long time until the feature is flashed
in the LCD. And then press the key for a short time to select the
charging current. An automatic exit would be achieved 5s after the above
selection. Alternatively, press the key for a relatively long time to exit.
Setting of charging current
Li-ion / LiFePO4
Ni-MH / Ni-Cd
Levels of
charging current
Press the key for relatively long time until all the channel symbols flash,
which means an access to a All Selected mode. And the ALL Selected
mode would be exited if there is no operation launched in 5s after the above
access.
1.Under the All Selected mode, a charging current may be set up synchro-
nously for four channels by pressing the key for relatively long time.
2. Under the All Selected mode, battery type may be selected synchronously
for four channels by clicking the key twice.
Note: Under the All Selected mode, a setting is only effective to such a
channel as contains a battery. It is impossible to select battery type for a
Ni-MH/Ni-Cd battery.
Synchronous four-channel setting
04
