Prodomus
13
Caution! Always switch off (power switch position “0”) the appliance immediately and unplug after
each use.
SCOPE OF DELIVERY
Juicer
Stainless steel sieve
Sieve holder
Transparent splash protection lid
Pusher
Pulp container
Instruction manual
TIPS FOR USING THE JUICER
The juicer makes it easy to prepare reshly made vegetable and fruit drinks efficiently. Some fruit and vegetables
(e.g. apples, carots) will not need to be cut, thanks to the extra wide feed opening of the juicer. Simply remove all
uneatable parts: Seeds, stalks, stones, or hard paring etc. After juicing you may use the pulp (residues of
processed fruit or vegetables) for delicious sauces, soups, desserts or just for the compost in your garden. The
appliance is designed for a quick and easy cleaning after juicing fresh fruit, vegetables and herbs.
Do not leave any food residues dry on the surfaces of the appliance. If pulp is left to dry on the filter basket, it may
clog the filter mesh. This will decrease the performance of the juicer. In this case soak the filter basket in hot soapy
water to remove any dried pulp before using again (see care and cleaning). Do not use any abrasive cleaners or
cleaning pads to avoid damage.
BEFORE THE FIRST USE
Carefully read and follow all instructions and safeguards before operating.
Remove all packaging, foils etc.
Place the appliance on a stable, flat and dry surface which is large enough to work without any trouble to eliminate
the risk of falling down. Make sure before you assemble any parts that the appliance is not connected to the power
supply and the switch is switched OFF (switch position ‘0’). Before the first use clean all removable parts which
come in touch with food in slightly warm and soapy water, rinse and dry. Caution with the filter basket, the blades
in the base are extremely sharp! Risk of injury! (See care and cleaning)
Note: Do not use the appliance for chopping, slicing, or shredding of hard foods and nutrients (i.e. nuts or
chocolate). Do not use for mincing meat or pureeing.
ASSEMBLING THE JUICER
See the picture at ‘list of parts’ to get to know your juicer. For assembling refer to picture and following instruction.
Note:
Treat your juicer and all parts with care and without using violence. Caution! Risk of injury! the blade inside
of the sieve is very sharp! Assemble the appliance correctly and completely before each use!
Caution!
Ensure that the item is switched OFF before connecting the appliance to the mains, to avoid accident by
accidentally switching on. The blue lamp indicates connection to mains as long as plugged in.
Place the sieve holder on top of the motor base. Press slightly down to fix it properly.
Place the pulp container under the pulp outlet. The pulp container has to be positioned exactly under the outlet
to guarantee splash protection. Place a juice container under the spout.
Insert the stainless steel sieve centered in to the sieve holder. Always take the stainless steel sieve at the rim,
to avoid the risk of injury by touching the sharp blades. Rotate the stainless steel sieve until it is seated
properly on the gear. Caution! Make sure that the filter basket is mounted properly by rotating it slightly. The
basket may not wobble or tilt. The filter basket must rotate easily and without rubbing on the filterbase.
