Prodomus
16
Cleaning and maintenance
Never allow the connector parts to become wet nor immerse the kettle into water. Wipe the
unit only with a damp cloth. Furring up is a common problem in hard water areas, and it is
recommended that a de-scaling fluid is used to remove the deposits.
The guarantee covers manufacturing and material faults whereas limestone removing as
part of cleaning and maintenance is not covered.
Decalcification
The decalcification interval depends on the hardness of the water and the frequency of
use. Decalcification should be carried out every 1 – 3 month. Please use common
decalcification agent (commercially available) and read and follow its instructions of use
closely.
Technical data
220-240V~ 50/60Hz 2500-3000 w
This appliance is tested according to GS and corresponds to CE directives.
Trouble shooting
Defect
Reason
How to repair
Item does not operate
Item is switched off
Item is not connected to the
mains outlet
Set switch to ON
Connect the plug to the mains
socket
The kettle switches off
too early
The kettle is heavily scaled
De-scale the kettle
The kettle does not
switch off
The lid is not closed properly
Close the lid properly
The kettle can not be
switched on
The boil-dry protection has
triggered and the kettle has not
cooled down sufficiently
Take the kettle from the base and let
cool down
Disposal
Notice for environmental: If at any time in the future you should need to dispose of this
product please note that waste electrical products should not be disposed of with
household waste. The symbol (crossed dustbin see on the right side) on the
packing is indicating it.
Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice. (Waste Electrical and Electrical Equipment Directive)
