Mi XMDZLZXC01QJ, User Manual

Page: 13 / 137

11
Safety Precautions
Battery Charger
Model
Input
Output
Manufactured by
Address
LI-0844200200NA
100-240 V~, 2.5 A (Max.) 50/60 Hz
42.0 V 2.0 A, 84 W
Shenzhen AMC Technology Co., Ltd.
Building 11, Dragon River Industrial Zone, Yeung Tin Ave, Lung Guang,
Shenzhen, China.
Battery and charging
• The operating temperature for charging is between 0°C to 45°C and for discharging is between -20°C
to 60°C.
• The charger is designed for indoor use only. Do not place the battery in any liquid (acidic or alkaline).
Keep it dry and never expose it to rain and high temperature environment.
• Connecting reversely the polarity of battery is strictly prohibited.
• Do not incinerate, disassemble, reassemble, short circuit batteries or destroy the battery.
• Charge with original or authorized charger. The maximum charging time is 6 hours and the charging
current should be less than 2A. Misuse other types of batteries may burst causing personal injury
and damage.
• Keep the battery in cool and dry place, and charge it for 2 hours every 2 months for a better
maintenance.
• Always follow the instructions in the user manual for charging the battery.
• Do no use the unqualified charger that is not applicable to the specified type and voltage to charge
the battery. The charger can charge Lithium-ion battery (36 Vdc, max. capacitance: 5800 mAh (single
cell), comply with IEC 62133).
• Do not used for non-rechargeable batteries, as they can overheat and break.
• The chargers are not intended to charge automobile batteries.
• Prevent foreign objects from entering the charger during its use and storage. Prevent water and
other liquid from getting in, otherwise a short circuit may occur. Keep the battery well ventilated
when charging. Do not charge the battery in an enclosed area, in high temperature environments,
or under direct sunlight. Prevent flames and sparks, explosive gases. Store the charger in a cool and
dry place when not in use.
• When charging, insert the battery first, and then connect the charger to the power supply. When the
battery is fully charged, cut off the power supply first, and then remove the battery connector.
• When the indicator turns green, cut off the power supply in time. Do not connect the charger to an
AC power without a load for a long time.
• If there is an odor, the indicator displays an error, or the charger shell overheats during charging,
stop charging immediately or go to the official dealer for repairing, or contact the after-sales service
department for help.
• If possible, do not carry the charger with the bike. If required, you can put the charger into a toolbox
with proper shock absorption, and then carry the toolbox with the bike.
• Do not disassemble or replace any components in the charger without authorization. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.