Mi SCWXCQ02ZHM User Manual Download Page 5

Using Different Attachments

Electric Mite Brush: Strong vibrations yield deep cleaning action for 
removing mites and dust from mattresses and fabric surfaces.

2-in-1 Crevice Nozzle: Suitable for vacuuming cracks, corners of doors 
and windows, stairs, and other hard to reach places.

Soft Roller Brushbar: Suitable for vacuuming the hard surfaces such as 
floor, tile, marble, as well as for vacuuming up larger pieces of dirt and 
debris. The soft roller brushbar can also be directly attached to the 
vacuum.

2-in-1 Brush Nozzle: Suitable for vacuuming up dust and mites on 
beds, sofas, and other furniture fabric.

Note:
If any rotating part becomes stuck, the vacuum may turn off automatically. Remove any trapped 

foreign objects, then resume use.
The vacuum will automatically shut off if its motor enters overheat protection mode. Wait until the 

motor's temperature returns to normal before resuming use.

Charging

Battery Status Indicator

Low battery
Half battery
Nearly full

Fully charged
Fully charged

Note: Once the vacuum is fully charged, the indicator 

will turn off after 5 minutes, and the vacuum will enter 

the energy-saving mode.

Please read the Safety Instructions in this User Manual before 
proceeding.

Charge the vacuum with the power adapter

Charge the vacuum on the charging mount

Note:

Fully charge the vacuum before using it for the first time. This will 
take about 4 hours.
Vacuum cannot be used while charging.
Vacuuming at turbo mode for a prolonged period will cause the 
battery to heat up, which increases charging time. Allow the vacuum 
to cool down for 30 minutes before charging it.
Charging adapter is not compatible with Mi Handheld Vacuum 
Cleaner.

Off

Blinking

On

How to Use 

7

8

Summary of Contents for SCWXCQ02ZHM









Reviews: