Installing the 2-in-1 Charging & Storage Mount
1. The 2-in-1 charging & storage mount is an optional accessory, you
can install it based on your requirements.
2. The mount should be installed in a cool, dry place near a power
outlet, out of direct sunlight, and away from moisture-prone areas,
such as a kitchen.
3. Securely install the mount using mounting hardware suitable for the
type of wall selected. Make sure the installation area is clear of any
pipes such as gas or water lines, and air ducts, electric wires and cables,
or drainage lines.
4. It is recommended to hire a professional to install the mount and to
use protective clothing, goggles, and other protective equipment
where necessary.
5. Using an electric drill, mark and drill two 8 mm diameter holes into
the wall where desired to a depth of about 30 mm. Insert the wall
plugs into the holes, position the mount, then fasten it to the wall with
the included screws.
Vacuum and Accessories Installation Diagram
Insert till it clicks into place
Insert till it clicks into place
Installation
Recommended Height: 1.06 meters from the ground
Screw
Wall Plug
1.06m
5
6