03
04
3. Assembly and Set-Up
3. Tighten the screws onto both sides of the stem
with the T-shaped Allen key.
4. After the assembly, press the power button
to check if it's working properly.
2. Install the handlebar onto the stem.
1. Fold the handlebar stem up, fasten it, and put
down the kickstand.
2. Product Overview
Battery
Compartment
Disc Brake
Brake Light
Buckle
Scooter Bell Lever
Control Panel & Power Button
Accelerator
Mudguard
Quick Release Lever
Kickstand
Folding Mechanism
Front Fork
Stem
Wheel Motor
Charging Port
Headlight
Handlebar
Brake Lever
Control Panel & Power Button
Speedometer: Display the current speed of the scooter, as well as to display error codes.
Modes: Three riding modes available. "ECO" for Energy Saving mode (top speed approx
.
15 km/h, smooth throttle, suitable for beginners),
"D" for Standard mode (top speed approx
.
20 km/h) and "S" for Sport mode (top speed approx
.
25 km/h, powerful, only
recommended for skilled riders).
Bluetooth: The icon indicates that the scooter has been successfully connected to the mobile device.
Error: The wrench icon indicates that the scooter has detected an error.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20 % of a full battery.
Power Button: Press the button to turn the scooter on, and press and hold the button for 2 seconds to turn the scooter off. When the
scooter is on, press the button to turn the headlight on/off, and double press to switch between modes.
Scooter Bell
