page. 15
MONOMAX N / NS - NC / NCS
DUOMAX N / NS - PN / PNS
MHS
Fitting the casing Monomax N - NS - NC - NCS
(up to 420 model)
- Wrap the glass wool around the boiler body leaving the
bulb well (P) on the top side exposed.
- Loosen screw (V) and rotate towards you the frontal part
of the electric control panel (see fig.11-2) and remove
the half cut plastic plate K
- Pass the burner connection plug through the slot on the
lower side of boiler front plate and inser t the
thermometer and thermostats bulbs in the slot K and in
the wells P.
- Fit the panels (1S) and (1D) inserting the upper fold into
the square tube and the lower fold to the boiler side
frame.
- Fit the upper panel (3S) on the boiler
- Fit the panel (3D) ensuring that the capillaries are
inserted in the slot provided in the panel (3D).
- Fit the electric control panel on panels (3S) and (3D)
using screw (V1) (see fig. 11-3).
- Connect electric control panel to mains supply following the
wiring diagram included in the control panel.
- Re-place the front part of the control board and tighten
the screw V.
Fig. 11-1
P
Bulb well for:
Regulation boiler thermostat
Security thermostat
Minimum thermostat (Circulator consent thermostat)
Thermometer
V
V
V1
V1
K
V1
V1
Fig. 11-2
Summary of Contents for DUOMAX N Series
