page. 18
MONOMAX N / NS - NC / NCS
DUOMAX N / NS - PN / PNS
MHS
V
V
V1
V1
K
V1
V1
Fig. 11.1-1
5
Fig. 11.1-2
- Wrap the glass wool around the boiler body leaving the
bulb well (P) on the top side exposed.
- Loosen screw (V) and rotate towards you the frontal part
of the electric control panel (see fig.11.1-2) and remove
the half cut plastic plate K
- Fit the electric control panel to the top panel using screw
(V1).
- Pass the burner connection plug through the slot on the
lower side of boiler front plate and inser t the
thermometer and thermostats bulbs in the slot on panel
(5) and in the wells P1 and P2.
- Connect electric control panel to mains supply following the
wiring diagram included in the control panel.
- Re-place the front part of the control panel and tighten
the screw V.
- Fit the panels (1, 2, 3, 4) inserting the upper fold into the
square tube and the lower fold to the boiler side frame;
- Fit the panel (5)
P1
- Bulb well for 1st boiler:
Regulation boiler thermostat
Security thermostat
Minimum thermostat (Circulator consent
thermostat)
Thermometer
P2
- Bulb well for 2nd boiler:
Regulation boiler thermostat
Security thermostat
Minimum thermostat (Circulator consent
thermostat)
Thermometer
Fitting the casing Duomax N - NS
Summary of Contents for DUOMAX N Series
