Operating Instruction MHM Flash Cures
Operating instructions MHM Flash Cures.docx
Page 2 of 17
Preface
Dear Customer,
congratulations and thank you for choosing the MHM Flash Cure. The Flash Cure is designed to
provide the highest standards of performance and reliability during its guaranteed long operating
life. Highly innovative and precise MHM technology provides a combination of the finest built
quality along with optimal safety. We trust that these Operating Instructions will assist you in
becoming familiar with the safe and efficient operation of the Flash Cure.
Important Note:
Due to our policy of continuous improvement, we reserve the right to change specifications without
prior notice. Therefore, certain individual fittings and components may differ slightly from the
model detailed in this document. For any further questions regarding your MHM Flash Cure, please
contact the MHM service team.
Wishing you every success with your future production.
Machines Highest Mechatronic GmbH
Important Advice Regarding These Operating Instructions
These Operating Instructions form an integral part of the MHM Flash Cure and must be made
available to all authorized personnel at all times. No particular sections or pages must be removed
from these Operating Instructions, and any missing sections or pages should be replaced
immediately, in particular with regard to section
“Safety Instructions”.
These Operating Instructions are subject to international copyright and may not be reproduced
and/or revised without our prior written approval.
©2018 Machines Highest Mechatronic GmbH, Erl, Austria. (All rights reserved).
Published by:
Machines Highest Mechatronic GmbH
Muehlgraben 43a
A-6343 Erl / AUSTRIA
Contact details:
Tel43 (0) 5373 – 76080-18
Mobile:
+43 (0) 664 – 8151380
E-mail:
Erl, December 2018
