MHC Medical Products Easy Touch User Manual Download Page 47

Page: 47 / 52

TRUE Lifetime Warranty

MHC Medical Products, LLC guarantees that this device will be free of

defects in materials and workmanship for lifetime duration from the date

of original purchase. Our company will repair or replace any EasyTouch

Glucose Monitoring System found defective with a new unit at our discretion.
This warranty does not apply to the performance of a EasyTouch

Glucose

Monitoring System that has been altered, misused, tampered with or abused.

In no event shall our company be liable to the purchaser or any other person

for any incidental, consequential, or punitive damages arising from or in any

way connected with the purchase or operation of the EasyTouch

Glucose

Monitoring System or its parts.
For manufacturer warranty services, purchaser must contact

MHC Medical Products, LLC.

Summary of Contents for Easy Touch





















































Search results

Summary of Contents for Easy Touch

Reviews:

Related manuals for Easy Touch

Brands by name

Popular brands

MHC Medical Products Easy Touch, User Manual

Search results

Summary of Contents for Easy Touch

Reviews:

Related manuals for Easy Touch

Brands by name

Popular brands