Vega EMS-1 Operating Manual
Page 13
4.4 RPM 2 / Fuel Flow Setup menu option
The RPM-2 input can be used for RPM or fuel flow.
If RPM is selected for “MODE”
Mode:
Select if you want to display
“RPM2”
or
“FUEL FLOW”
or “OFF”
Display:
Select if you want the RPM to be displayed in
“RPM”, “PERCENT” or “OFF”
.
RPM 100%:
Select the maximum value that you want the RPM to correlate to 100%. This is only shown if
“Percent”
is selected for
display.
Display Max:
Select the maximum RPM that you want the RPM dial to show. This can give you increased display resolution.
Display Min:
Select the minimum RPM that you want the RPM dial to show. This can give you increased display resolution.
High Alarm:
This enables or disables the RPM high alarm.
High Alarm:
Enter the RPM threshold for when the high alarm must be activated. Any RPM value above this value will activate the
alarm.
