MGI ZIP X1, User Manual

Page: 7 / 13

MGI Zip X1
User Manual
13 12
6.0 Operating the Digital Top Box
6.1 Top Box Display
Light 1: Zip X1 active
A green light will appear on the left hand side when the Zip X1 is
active and moving.
Light 2: Battery indication
The light on the right hand side displays the battery status. There
are three colours of battery status: Green [charged], Amber [low]
and Red [very low].
Number Display:
This shows the speed setting 1 to 9. The higher
the number the higher the speed.
6.2 Start / Stop the Zip X1
Zip X1 Speed Control
Please note the following points regarding the Zip X1 Speed
Control.
1. To select the desired speed, rotate the speed control button.
Turning the speed control button clockwise will increase the
speed, whilst anti-clockwise will decrease speed.
2. The speed setting chosen is displayed in the centre of the
coloured screen.
Please note you will feel notches as you rotate the speed control. The notches
do not indicate a change in speed. The speed will only increase or decrease as
the number changes in the display.
3. To start the Zip X1 at this desired speed, tap the top
of the speed control button.
4. Another tap will stop the Zip X1.
5. The desired speed can be altered up or down while
the Zip X1 is moving.
6.3 Turn the Zip X1 Off
Zip X1 Battery
Please note the following points regarding the Zip X1 Battery.
Connecting the Battery onto the Zip X1
1. Position the battery on the Zip X1 and push the battery
down to secure it. Push the battery handle down to connect
the battery to the Zip X1.
2. To turn the Zip X1 Top Box Display off:
Hold down the Start/Stop Speed Control Button for four
seconds and the display will turn off thereby disabling the
Top Box.
Please note that the battery will still be connected to the Zip X1
and will continue to drain whilst connected.
Please note that the Zip X1 display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the Zip X1 and will continue to drain whilst connected.
To reactivate the Top Box Display, whilst the battery is connected,
hold down the Start/Stop Speed Control Button for four seconds
and the display will turn on thereby enabling the Top Box.
To fully shut down the Zip X1 and prevent the battery from
discharging, disconnect the battery by lifting its handle. The
battery can be left on or removed from the Zip X1.
7.0 Front Wheel Alignment
During the life of your Zip X1, it may require a realignment to
ensure it tracks straight on flat surfaces. Follow these instructions
to correct the front wheel alignment of the Zip X1.
Step 1:
Release and turn the lever to loosen the front wheel.
Light 2 Light 1
Speed
Speed Control