MGI ZIP X1, User Manual

Page: 5 / 13

3.5 Fourth Foldable Rear Wheel
The MGI Zip X1 comes standard with a fourth foldable rear wheel.
This wheel MUST be unfolded into position at all times when the
Zip X1 is in use. This will reduce damaging the Zip X1, and provide
the ultimate in stability across all terrains. This fourth wheel should
be cleaned regularly with a cloth to ensure it can be folded as
required for storage.
3.6 GPS Holder and Top Handle Compartment
In the top handle compartment there is a position for a GPS/
mobile device holder. Open the compartment and connect the
holder into position. To open the holder always press the button
at the top of the holder. Place the GPS into the cradle, then close
the holder by squeezing the two sides closer together.
3.7 Inverting Rear wheels
The rear wheels can be inverted on the axle to reduce the size of
the Zip X1 when folded. To invert the rear wheels, press the grey
release button on the wheels hub and remove from the axle. Invert
the rear wheels so that the wheels hub protrudes away from the
axles. Press the grey release button on the wheels hub and release
once the wheel is fitted onto the axle.
MGI Zip X1
User Manual
09 08
3.4 Folding
Step 1: Disconnect the battery by
lifting the battery handle. It can be
left on or removed from the Zip X1.
Step 2:
Open the fold lever
to release the handle.
Step 3: Pull up the latch at the
bottom of the handle.
Step 4:
Lower the handle down flat.
Step 6:
Close the fold lever to lock
the handle into place.
Step 5: Push the
toggle down on the
top bag support and
then move the Top
Bag Support down so
that it locks over the
front wheel assembly.
Toggle