15
11.
Positioning the Seat (Accessory SL150c)
Place the seat stem into its position in the seat stem bracket on the right hand side of the buggy.
MOST IMPORTANT: DEPRESS THE SEAT WITH YOUR HAND BEFORE SITTING. DO NOT
USE THE SEAT ON UNEVEN SURFACES.
Please note MGI does not warrant any set support brackets that are damaged or bent.
12.
Assembling the Umbrella Holder (Accessory SL150c)
Your buggy comes with an umbrella holder. The umbrella holder needs to be bolted into position.
Simply follow the pictures above. When not in use the umbrella holder can be turned to its side.
If you take your buggy home in your car, you may need to do that prior to folding the buggy down.
Your umbrella holder can be adjusted both to the side and backwards and forwards.
The umbrella is secured inside the umbrella holder by tightening the plastic bolt located near the
top of the holder.
DO NOT LEAVE YOUR UMBRELLA UP IN THE UMBRELLA HOLDER IN WINDY
CONDITIONS.
If the wind catches the umbrella, it could cause your buggy to tip over and cause damage, which
will not be covered by warranty.
