MGI MGISTP-3000, User Manual

Page: 28 / 51

Installing the devic
e
21
Installing the device
The device can be installed only by the technical support.
T o e n s u re t h a t t h e p e r fo r m a n ce o f t h e d e v i ce m e e t s t h e
specifications, the technical support will perform a standard loading
before customer training and use.
Powering on or off the device
z
Ensure that the power switch is in the position before connecting to
the power supply.
z
The mains supply socket should be a standard three-prong socket and
its protective grounding terminal should be connected to the protective
grounding cable of the power supply system. If the requirements above
are not met, the device must be protectively grounded as described in
Preparing the power supply on Page 20.
z
Ensure that the grounding cable is connected in accordance with the
relevant standard or under the guidance of the experienced electrician.
z
We recommend that you use the power cord provided by the manufacturer
to connect to the power supply, and the power cord can be only used with
this device. Failure to do so might damage the power cord or device.
z
Do not replace the detachable power cord with inadequately rated cords
(250V, 16A).
Powering on the device
For the connector location and use of the computer, refer to the user guide
of the computer.
Perform the following steps:
1. Press the power buttons of the monitor and computer, and turn
the power switch of the device to the position.
2. Enter password provided by the technical support to log in to the
computer.
The desktop appears after login.