Electrical saf
ety
3
z
Ensure that the power supply is disconnected before cleaning the device.
Otherwise, it might cause personal injury.
z
Only the technical support authorized by the manufacturer or the qualified
and trained personnel can unpack, install, move, and maintain the device.
Incorrect operation might cause inaccurate experiment results or damage to
the device.
z
Do not move the device after the technical support have installed and
debugged the device. Incorrect operation will result in unsuccessful
workflow running. If you require to re-position the device, contact the
technical support.
z
Only trained professionals such as doctors, technicians, or laboratory
assistants can operate the device.
z
Do not operate the device in the presence of flammable or explosive
liquids, vapors or gases. Otherwise, it might result in device malfunction.
z
Do not disconnect the power cord under the power-on status.
z
Do not reuse the disposable items.
z
Only the peripheral devices and consumables specified by the manufacturer
can be used.
z
If you have maintenance questions that are not mentioned in this manual,
consult the technical support.
z
Only the components provided by the manufacturer can be used for
device maintenance. Unapproved components might damage the device or
degrade performance.
z
The device is verified before delivery. If serious deviation occurs during use,
contact the technical support for calibration.
Electrical safety
z
Before initial use of the device, assess the electromagnetic environment in
which the device will be used.
z
Do not use the device in close proximity to the sources of strong
electromagnetic fields, such as unshielded sources of radiated emissions.
Radiated signals can reduce the accuracy of the workflow.
z
Ensure that the device is properly grounded, and the grounding resistance
is less than 4 Ω. Failure to do so might result in
unsuccessful workflow
running or even electric shock.
z
Do not remove the device cover and expose the inner component outside.
Otherwise, it might cause electric shock.
Summary of Contents for MGISTP-3000
