background image

 

 

This  height  applies  either  side  of  the  projection  of  the  outermost 
conductors of the power line on the ground surface, for a distance of: 

• 2 m for power lines operating at a nominal voltage not exceeding 1000V; 
• 15 m for power lines operating at a nominal voltage exceeding 1000V. 

  Electric  animal  fences  intended  for  deterring  birds,  household  pet 

containment  need  only  be  supplied  from  low  output  energizers  to  obtain 
satisfactory and safe performance. 

  Fence  wiring  should  be  installed  well  away  from  any  telephone  or 

telegraph line or radio aerial. 

  The size of the warning sign shall be at least 100mm x 200mm. 

  The background colour

 

of both sides of the warning sign shall be yellow. 

The inscription on the sign shall be black and shall be either: 

-   

the substance of “CAUTION: Electric Animal Fence” or, 

-    the symbol shown: 
 

 

 
 

  The  inscription  shall  be  indelible,  inscribed  on  both  sides  of  the  warning 

sign and have a height of at least 25mm. 

  Ensure  that  all  mains  operated  ancillary  equipment  connected  to  the 

electric  animal  fence  circuit  provides  a  degree  of  isolation  between  the 
fence  circuit  and  the  supply  mains  equivalent  to  that  provided  by  the 
energizer. 

  Protection from the weather shall be provided for the ancillary equipment 

unless this equipment is certified by the manufacturer as being suitable for 
use outdoors, and is of a type with a minimum degree of protection IPX4. 

This  energizer  complies  with  international  safety  regulations  and  is 
manufactured  to  international  standards.  MGG  reserves  the  right  to  make 
changes  without  notice  to  any  product  specification  to  improve  reliability, 
function or design. 
 
 

Summary of Contents for S100














Reviews: