background image

 

 

Foreword 

Thank  you  for  buying  an  MGG  electric  fence  energizer.  This  Energizer  has  built-in 

lightning protection devices to reduce the incidence of lightning damage and built-in RFI 

(Radio Frequency Interference) Suppressed Circuitry. If for any reason you are not happy 

with your purchase, please return the energizer in new condition to MGG within 14 days of 

purchase and we will give you a full refund (excluding freight). If you have any questions 

regarding this product please email us: 

[email protected]

 or freephone us on 0800 

449 669 

Please read this manual carefully before using this product and keep it handy. If you have 

problems in the process of use you can read it again. Do not let children operate or play 

with an electric fence energizer. 

1. Introduction 

This manual describes Andmon electronics’ electric fence energizer of : 
0.15J model              S150   

 

0.1 J model                S100 

2. Important safety introduction 

WARNING: Please read all instructions 

 

  Do not touch a live fence 

  Do not drench with water. 

  This  product  is  for  use  in  controlling  livestock.    Any  other  use  is 

prohibited. 

  Keep fence clear of weeds, branches etc to avoid electrical shorts resulting 

in battery drainage. 

  Do not climb over, through or under a multi -wire electric fence. Use a gate 

or a specially designed crossing point. 

  Do NOT become entangled in the fence. Avoid electric fence constructions 

that are likely to lead to the entanglement of animals or persons. 

  Electric animal fences shall be installed and operated so that they cause 

no electrical hazard to persons, animals or their surroundings. 

  It  is  recommended  that  in  all  areas  where  there  is  a  likely  presence  of 

unsupervised  children  who  will  be  unaware  of  the  dangers  of  electric 
fencing, that a suitably rated current limiting device having a resistance of 

Summary of Contents for S100














Reviews: