11
UG-015
Connecting together Multiple ramps:- (3no max)
Working on solid ground near the location where the ramps are to be installed.
Line up the ramps to be connected, so that ‘female connecting blade’ is orientated to the ‘male
connecting pin’ of the ramp to be connected to.
Remove the r clip and take off the loose ‘Keeper plate’.
Lift the ramp and manoeuvre so that the ‘female blade’ on the ramp, locates over the ‘ramp
attachment bar’ on the adjacent platform.
Fit retaining bolts through – connecting flanges, on joined ramps. 4 off M16x50 ISO4017 bolts, 8
washers, and 4 off M16 Nyloc nuts are required to do this.
Fit the ‘keeper plate’ over the connection, and re-fit the r clip. Test that the ramp cannot be lifted or
knocked off the connection.
Once connected – the ramps can be lifted using the outermost ramps lift points, and fitted to an
over shoe or platform, as per the instructions in that section.
