9
UG-015
Correctly fitted overshoe
To fit a Gangway ramp onto an over shoe, or directly onto a Laddersafe platform (if fitted
with mount spigots) :-
Place the Gangway ramp on flat ground near the platform to be fitted to. Two operatives one each
side of the ramp will be required.
Remove the r clip and take off the loose ‘Keeper plate’.
Lift the ramp and manoeuvre so that the ‘female blade’ on the ramp, locates over the ‘ramp
attachment bar’ on the overshoe or platform.
Fit the ‘keeper plate’ over the connection and re-fit the r clip. Test that the ramp cannot be lifted or
knocked off the connection.
Pivot plate fully
engaged and
locked
Location plate
flush to
Laddersafe
