background image

9

48

Step 71:

Attach (2) Roof Supports (J1) to the Roof Board (C11) using (2) Screws (C3). Attach the 

Roof Supports to Tower Legs (C01) and (L03) using (2) Screws (C4). Ensure the top 

edges of the Roof Supports are flush with the top edge of the Roof Board.

Step 72:

Attach (3) Roof Supports (J1) to the Roof Board (C11) using (3) Screws (C3). Attach the 

Roof Supports (J1) to the Tower Legs (L05), (L02), and (C02) using (3) Screws (C4). Ensure 

the top edges of the Roof Supports are flush with the top edge of the Roof Board.

LIMITED WARRANTY

The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in 
materials or workmanship for one year from the date of purchase (dated sales receipt is required for proof of purchase).  In addition, all 
wood carries a pro-rated 5 year warranty against rot and decay. Please contact consumer service for any charges associated with 
replacement parts under this warranty. All other parts, such as hardware, swings, rides, accessories, and slides carry a one year warranty.  
The Little Tikes Company will replace any parts within the first 90 days from the date of purchase if they are found to be missing from the 
original packaging or damaged upon receipt. 

This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum 
life and performance of this product, and failure by the owner to maintain the product according to the maintenance requirements may 
void this warranty. Maintenance guidelines are provided in this manual.

This limited warranty does not cover:

• Labor for any inspection
• Labor for replacement of any defective item(s)
• Incidental or consequential damage 
• Cosmetic defects which do not affect performance or integrity of a part or the entire product
• Vandalism, improper use, failure due to loading or use beyond the capacities stated in this manual
• Acts of nature including but not limited to wind, storms, hail, floods or excessive water exposure
• Improper installation including but not limited to installation on uneven, unlevel or soft ground
• Minor twisting, warping, checking or any other natural occurring properties of wood that do not affect performance or integrity

This warranty is valid only if the product has been assembled and maintained per the instructions. Any modifications made to the 
original product could damage the structural integrity of the unit, leading to failure and possible injury. Making modifications to this 
unit voids the warranty. The Little Tikes Company disclaims all other representations and warranties of any kind, express or implied.

RESIDENTIAL HOME USE ONLY. 

This unit is not intended for public use. The manufacturer does not warranty this product if it is used 

for commercial purposes like daycare, schools, churches, nurseries or parks.

U.S.A and Canada: 

For warranty service or replacement part information, please visit our website at www.littletikes.com, call 

1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some 
replacement parts may be available for purchase after warranty expires—contact us for details.  

Outside U.S.A and Canada: 

Contact place of purchase for warranty service. 

This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some 
countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion 
may not apply to you.

Summary of Contents for Real Wood Glamping House 657511C3





























Reviews: