MG Energy Systems B.V. | Foeke Sjoerdswei 3 | 8914 BH Leeuwarden | The Netherlands
+31 (0)58 750 89 47 | [email protected] | www.mgenergysystems.eu
Innovation
in energy storage
2.2.2
Qualifications and training
The personnel responsible for the assembly, operation, inspection, and maintenance of the battery
system must be appropriately qualified. The user company must do the following tasks:
Define the responsibilities and competency of all personnel working on the battery system.
Provide instruction and training.
Ensure that the contents of the operating and safety instructions have been fully understood
by the personnel.
Check the local safety rules and guidelines they have higher priority over the manufacturer’s
specification in this manual in case of regulatory conflicts.
Instruction and training can be carried out by MG Energy Systems B.V. by order of the user company.
2.2.3
Non-compliance risks
Failure to comply with all safety precautions can result in the following conditions:
Death or serious injury due to electrical, mechanical, and chemical influences.
Environmental damage due to emission of hazardous substances.
Product damage.
Property damage.
Loss of all claims for damages.
2.2.4
Unacceptable modes of operation
The operational reliability of this product is only guaranteed when it is used as intended. The
operating limits on the identification tag and in the datasheet may not be exceeded under any
circumstances. If the identification tag is missing or worn, contact MG Energy Systems B.V. for
specific instructions.
