MFJ-2010 Instruction Manual
Ultralite OCFD
4
Portable Installation
PVC-jacketed wire permits some contact with branches and leaves, but
avoid routing wire through dense vegetation as it may degrade
performance significantly. If end supports are too close together for
installing full length, the insulators provide the option to “droop” one or
both antenna legs by a few feet. Feed excess wire through the stress
relief holes and re-clamp it under the washer (see below). If only one
good support is available, use a “V” style halyard mount, but keep both
ends as far above the ground as possible to limit de-tuning.
Clamping Washer
Insulator
Drooping Wire End
Support Halyard
